-
For optimal performance, it is recommended to adjust runout of outer points and chisel with a maximum of 0.02 mm exceeded runout will have influence on drill performance, tool life and hole quality.
- LOGIQ3CHAM drills can be used either on milling centers or lathe machines.
- LOGIQ3CHAM drills can be used on sloped surfaces up to 12°. When drilling sloped surfaces of up to 12°, reduce feed rate by 30-50% during penetration up to 5 mm depth; or use a spot or pre-hole drill to avoid drill deviation or poor drill performance.
- Interrupted cut has a direct influence on hole accuracy, quality and tool life
ดอกเอ็นมิล ISCAR รุ่น LOGIQ3CHAM
Quick Overview
LOGIQ3CHAM – Three flute exchangeable drills line designed to significantly increase productivity and reduce machining cycle time by up to 50% compared to conventional two flute drills.
ISCAR introduces a new LOGIQ3CHAM drill family which raises drilling performance levels to new heights. This family was designed by utilizing highly advanced technologies, based on ISCAR’s successful SUMOCHAM drill families.
รายละเอียด
ข้อมูลเพิ่มเติม
| Brand | ISCAR |
|---|
Request For Quote
Contact
ISCAR ( THAILAND ) LTD.
57,59,61,63 Soi Samanchan-babos
Sukhumvit Rd.,Phra Khanong,
Khlong Toey, Bangkok 10110
Tel :+ (02) 713 6633-8
Fax :+ (02) 713 6632 , (02) 712 0836
General E-mail:[email protected]
